New Mobile Launches November 2026: REDMAGIC 12 Pro, Oppo A7 Pro and Vivo X500 Series 📱

November 2026 is turning into a huge month for smartphone fans, with a powerful gaming phone going on sale, a long-lasting mid-range phone landing in Europe, and Vivo confirming its next flagship series for India. Here are the three launches you should know about.

1. REDMAGIC 12 Pro – the gaming beast goes global
REDMAGIC launched the 12 Pro globally on November 3, with open sales starting November 18. It packs Qualcomm's Snapdragon 8 Elite Extreme Gen 6 chip, a 6.85-inch 1.5K OLED display with a 185Hz refresh rate, and a huge 8,400mAh battery with 80W wired and wireless charging. The rear cameras are 50MP main + 50MP ultra-wide, with a 16MP under-display selfie camera. Prices start at $949 (about PKR 265,000 estimated) for 12GB + 256GB. Pakistan pricing and availability are not confirmed yet.

2. Oppo A7 Pro – big battery, sharp selfies
Oppo launched the A7 Pro in Europe on November 12. It features a 6.57-inch 120Hz AMOLED display, MediaTek Dimensity 6360 Max chip, a 50MP main camera and a 50MP ultra-wide selfie camera. The highlight is its massive 7,400mAh battery with 80W fast charging, plus IP69 water and dust resistance. It costs €499 (about PKR 145,000 estimated) for 6GB + 256GB, with a €70 launch discount in Belgium. No Pakistan launch date has been announced yet.

3. Vivo X500 series – India launch confirmed for November 26
Vivo has officially confirmed that the X500, X500 Pro and X500 Pro Max will launch in India on November 26, 2026, along with the Vivo Watch GT 2. The Pro Max leads with a 6.85-inch 2K 144Hz display, Dimensity 9600 Pro chip, a 200MP ZEISS APO telephoto camera and an 8,000mAh battery. Leaked India prices start around INR 1,19,999 for the X500. Pakistan availability is not confirmed yet.

Which of these three would you pick? Tell us in the comments!

---
📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz #NewMobileLaunch

WiFi Password Saved But Wrong? Fix Saved WiFi Password Errors 📶

Your phone says the WiFi password is incorrect, even though you are sure it is right — or it connects at home but not at the office with the same password. This is usually a saved-password problem, not a wrong password.

First, forget the network and connect again. Go to Settings, Wi-Fi, tap the network name, then tap Forget. Then select the network again and type the password carefully. Saved passwords can get corrupted after a software update, and forgetting the network clears the bad copy.

Second, check the password character by character. WiFi passwords are case-sensitive — a capital A is not the same as a small a. Watch out for similar characters like 0 and O, 1 and l. Tap the eye icon to see what you typed before connecting.

Third, check whether the router password changed. If someone changed the router password, your phone still holds the old one and will keep failing. Check the password on the sticker under the router, or ask the person who set up the WiFi.

Fourth, restart both the phone and the router. Unplug the router for 30 seconds and plug it back in. A router that has been running for weeks can refuse new connections until it restarts.

If it still fails, reset the network settings. This removes all saved WiFi networks and Bluetooth pairings, so you will need to reconnect everything — but it fixes most stubborn WiFi problems. If only one phone has the problem while other devices connect fine, the issue is in that phone. If no device can connect, the router itself needs checking.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz

USB OTG Mouse or Keyboard Not Working? Easy Fixes That Work 🖱️

A USB OTG adapter lets you plug a mouse, keyboard or pendrive into your phone, but sometimes nothing happens when you connect it. Before assuming the port is broken, check these simple fixes.

First, check that your phone supports OTG. Most modern Android phones do, but some budget models do not. Search your phone model with "OTG support" online, or install a free "OTG Checker" app from the Play Store.

Second, turn on OTG in settings. On many phones, especially Oppo, Vivo and Realme, OTG is off by default. Go to Settings, Additional Settings or System, and turn on OTG. Note that on some phones it turns itself off after 10 minutes of no use — turn it on again each time.

Third, try a different adapter. Cheap OTG adapters fail very often. Use a good-quality adapter that matches your port — USB-C or Micro USB — and test it with a pendrive first. If the pendrive works but the mouse does not, the adapter is fine and the problem is power.

A keyboard or mouse needs more power than a pendrive. If your phone cannot supply enough power, use a powered USB hub, or a wireless mouse with its own batteries and a small receiver.

Also restart the phone, update the software, and clean the charging port gently with a soft brush. Dust in the port is a common cause of loose OTG connections.

If no OTG device works at all, the charging port may be damaged. A technician can test the port and replace it if needed — it is usually a quick and cheap repair.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz

Phone Screen Turns On By Itself? Stop It With These Fixes 📱

If your phone screen lights up on its own in your pocket or on the table, it wastes battery and can even dial numbers by accident. The cause is usually a wake-up feature or a sensor, not a broken screen.

First, turn off Lift to Wake and Double Tap to Wake. On Android, go to Settings, Display or Gestures, and turn off "Lift to wake" and "Double tap to wake". On iPhone, go to Settings, Display and Brightness, and turn off "Raise to Wake".

Second, check your notifications. Every message, missed call or app alert wakes the screen. Turn off lock-screen notifications for noisy apps, or turn on Do Not Disturb at night.

Third, check your case and screen protector. A loose case that presses the power button, or a thick protector over the proximity sensor, can wake the screen again and again. Remove the case for a day and see if the problem stops.

Fourth, test the proximity sensor. Make a call and cover the top of the phone with your hand — the screen should go dark. If it stays on, the sensor is dirty or faulty. Clean the top edge of the screen carefully.

Restart the phone after changing these settings. If the screen still wakes up by itself in Safe Mode, an app is not the cause — it is a setting or a sensor. If it keeps happening with all wake features off, the power button or the sensor may be faulty, and a technician can test and replace it cheaply.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz

Video Recording Stops Automatically? Fix It in 5 Steps 🎥

Nothing is more frustrating than recording an important video and finding out the phone stopped after 30 seconds. This problem has a few common causes, and most of them are easy to fix.

First, check your storage. Video uses a lot of space, especially in 4K. If the phone runs out of space mid-recording, it stops without warning. Keep at least 2–3 GB free before recording anything long.

Second, check your SD card. A slow or faulty memory card cannot keep up with video, so the camera stops to protect the file. Record to the phone's internal storage instead, or use a fast card rated U3 or V30.

Third, watch the temperature. Long video recording heats the phone up, and the phone will stop recording to protect itself. Record in the shade, remove the phone case, and close other apps first. If the phone feels very hot, let it cool down before recording again.

Fourth, clear the camera app's cache. Open Settings, Apps, Camera, Storage, and tap Clear Cache. Also check for a camera app update, because a software bug can cause random stops.

Fifth, lower the video quality for long recordings. A 1080p video is much easier on the phone than 4K, and it still looks great. Use 4K only for short clips.

If recording still stops after all of this, back up your videos and reset the camera settings. If the problem continues, the camera module or the storage chip may be faulty and needs testing at a repair shop.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz

Phone Charging Slow After Battery Replacement? What Went Wrong 🔋

A new battery should charge at normal speed. If your phone charges much slower after a battery replacement, something went wrong during the repair — and it is worth finding out before the new battery is damaged too.

The most common cause is a low-quality battery. Cheap copy batteries often have less real capacity than the label claims, and their internal resistance is higher, so they accept charge slowly and heat up. Always ask for an original or good-quality branded battery, and keep the old battery's photo and the shop's receipt.

Second, the battery connector may not be seated properly. If the connector is loose, the phone gets an unstable connection and charges slowly or stops and starts. A technician can open the phone and reseat the connector in a few minutes.

Third, the charging flex or charging port may have been damaged during the repair. A small tear in the charging flex is easy to miss, and it limits the current the phone can take. If the phone only fast-charges with the cable held at an angle, the port or flex is the problem.

Test with the original charger and cable first, and try a battery-charging app to see the charging current in milliamps. A healthy phone usually draws 1000 mA or more. If it shows only 300–500 mA with a good charger, the battery or the charging circuit is the problem.

Go back to the shop that replaced the battery and show them the slow charging. A good shop will recheck its work under warranty. Never accept "the new battery needs time to settle" — a correct replacement charges normally from the first day.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz

Mobile Data Stops During Calls? Here's How to Fix It 📶

If your internet stops working every time you make or receive a call, the cause is usually VoLTE — Voice over LTE. When VoLTE is off, your phone drops from 4G down to 2G or 3G to carry the call, and on those old networks you cannot use voice and data at the same time.

First, turn on VoLTE. On Android, go to Settings, Mobile Network or SIM settings, and turn on VoLTE or "4G Calling". On iPhone, go to Settings, Mobile Data, Mobile Data Options, Voice and Data, and select 4G with VoLTE turned on.

Second, check your network mode. Make sure it is set to 4G/3G/2G Auto, not 3G only. A phone locked to 3G will always lose data during calls.

Third, restart the phone and check for a carrier settings update. On iPhone this appears as a pop-up when an update is available. On Android, check Settings, Software Update.

If VoLTE is on and data still stops, try the other SIM slot if your phone has two. A worn or old SIM can fail to register for VoLTE. Ask your network shop for a free SIM replacement — it takes five minutes and often fixes the problem.

Also check your APN settings, and confirm with your network that VoLTE is active on your number. Some networks need to enable it from their side. If the problem happens only in one area, it may be a weak tower signal, and nothing on the phone will fix it — but in most cases, turning on VoLTE solves it completely.

---

📍 Mian Traderz, Sahiwal — Mobile Repairing Center
📱 WhatsApp: 0347 8750000
🔧 #MobileRepairing #MianTraderz